Heating Services in Colorado Springs — Repair, Installation & Maintenance
From emergency furnace repair at 2 AM to complete system replacement and seasonal maintenance — every service we provide is calibrated for Colorado Springs' high altitude. We specialize exclusively in heating. No air conditioning. No plumbing. Just expert-level furnace and heating service.
Every Service Includes Altitude Calibration — No Exceptions
Most HVAC companies in Colorado Springs offer furnace repair as one of many services — alongside air conditioning, plumbing, electrical, and sometimes even general contracting. The problem is that furnace work at 6,035 feet requires specialized knowledge that generalists rarely possess.
At Colorado Springs' elevation, atmospheric pressure is approximately 11.8 PSI compared to 14.7 PSI at sea level — a 20% reduction. This directly impacts how your furnace burns fuel. According to ANSI Z21.47, gas appliances must be derated by 4% per 1,000 feet above sea level. For a furnace in Colorado Springs, that translates to a mandatory 24% BTU reduction from the manufacturer's sea-level rating.
When a technician skips this calibration — or does not know it is required — the consequences are serious: incomplete combustion, elevated carbon monoxide levels, premature heat exchanger cracking, higher utility bills, and a furnace that fails years before its expected lifespan.
Every service we provide — whether it is a $150 repair or a $6,000 installation — includes complete altitude verification. We measure gas manifold pressure with a calibrated manometer, verify orifice sizing against the manufacturer's high-altitude specification, and perform combustion analysis to confirm safe, efficient operation. This is included in every service call because it should never be optional at 6,035 feet.
Furnace Repair, Emergency Service, Installation & Maintenance
Our four primary furnace services cover every situation — from a furnace that will not ignite tonight to a brand-new system installation planned for next month.
Furnace Repair
Same-day furnace diagnosis and repair for all major brands — Lennox, Carrier, Trane, Goodman, Rheem, Bryant, York, and more. Our technicians carry the most common replacement parts on their trucks, which means most repairs are completed in a single visit. Every repair includes gas pressure verification and combustion analysis to ensure your furnace is operating safely at Colorado Springs' 6,035-foot elevation. We diagnose the actual problem and fix it — no upselling unnecessary parts or recommending replacement when a repair will solve the issue.
View furnace repair details →Emergency Furnace Repair
When your furnace stops working during a Colorado Springs winter night — where temperatures regularly drop below zero — you cannot wait until business hours. Our 24/7 emergency team responds to no-heat calls every day of the year, including weekends and holidays. Average response time is under 90 minutes within Colorado Springs city limits. We carry emergency repair parts on our trucks and have relationships with local suppliers for after-hours parts procurement when needed. Your family's safety does not wait for Monday morning.
View emergency service details →Furnace Installation & Replacement
When repair is no longer the right answer — because the heat exchanger is cracked, the furnace is 15+ years old, or repair costs exceed 50% of replacement value — we provide complete installation and replacement service. Every new furnace we install is properly sized using Manual J load calculations specific to your home's square footage, insulation levels, window count, and Colorado Springs' altitude. We install the correct high-altitude orifice kit, adjust gas pressure, and perform full combustion analysis before we consider the job complete.
View installation details →Furnace Maintenance & Tune-Up
Preventive maintenance is the single most effective way to avoid emergency breakdowns, extend your furnace's lifespan, and keep your heating bills under control. Our seasonal tune-up includes a comprehensive 21-point inspection: we check the heat exchanger for cracks, test the ignition system, clean or replace the air filter, inspect the blower motor and belt, verify thermostat calibration, test all safety controls, and perform combustion analysis to confirm altitude-appropriate operation. We recommend scheduling maintenance every fall before the heating season begins.
View maintenance details →Complete Heating Repair & Installation
Beyond furnaces, we service complete heating systems — including forced air, radiant heat, and new system design and installation.
Heating Repair
Heating system problems extend beyond the furnace itself. Ductwork leaks, thermostat malfunctions, zone control failures, blower motor issues, and gas line problems all affect your home's ability to maintain comfortable temperatures during Colorado Springs winters. Our heating repair service covers the complete system — from the gas supply line through the furnace, ductwork, and distribution components. We diagnose system-wide issues, not just individual components, because a furnace operating perfectly still cannot heat your home if the ductwork is losing 30% of its airflow through leaks.
View heating repair details →Heating Installation
New construction, major renovation, or complete system replacement — our heating installation service covers the full scope. We design heating systems from the ground up, starting with Manual J load calculations and Manual D duct design specific to Colorado Springs' climate data and altitude. We work with general contractors, homeowners, and property managers to specify the right equipment, size the ductwork correctly, and install everything to code. Every installation includes final commissioning with combustion analysis and airflow verification at all registers.
View heating installation details →Heat Pump & Boiler Services
Not every Colorado Springs property uses a traditional gas furnace. We also service heat pumps and boiler systems.
Heat Pump Repair
Heat pumps face unique challenges in Colorado Springs. At 6,035 feet, the reduced air density affects the outdoor unit's ability to extract heat from ambient air — particularly during extreme cold events when outdoor temperatures drop below the heat pump's balance point. Our technicians understand the altitude-specific performance curves for heat pump systems and can diagnose issues that general HVAC contractors often misidentify. We service both air-source and ground-source heat pump systems.
View heat pump repair details →Heat Pump Installation
Installing a heat pump in Colorado Springs requires careful sizing that accounts for altitude-adjusted heating capacity. A heat pump rated for a certain output at sea level will produce less heating capacity at 6,035 feet due to reduced air density. We use altitude-corrected performance data when selecting equipment, and we work with manufacturers to ensure the system is configured correctly for Colorado Springs' specific conditions. Every installation includes a backup heating source recommendation for extreme cold events.
View heat pump installation details →Boiler Repair
Boiler and hydronic heating systems are common in older Colorado Springs homes and many commercial properties. These systems require altitude-specific combustion calibration just like furnaces — the same ANSI derating rules apply to gas-fired boilers. Our boiler repair service covers both natural gas and propane boilers, including diagnosis of circulation pump failures, expansion tank issues, zone valve problems, air lock removal, and pressure relief valve testing. We also service radiant floor heating systems connected to boiler plants.
View boiler repair details →Our Service Process — From Call to Completion
Whether you need a repair, installation, or maintenance — here is exactly what to expect when you work with us.
Call or Request
Call (719) 602-8787 or submit a request through our website. A real person answers — not an automated system. We gather information about your issue and schedule a visit at a time that works for you. Emergency calls are dispatched immediately.
Diagnosis & Estimate
Our technician arrives on time, performs a thorough diagnosis, and explains exactly what is wrong — in plain language. You receive a written estimate before any work begins. No surprises. No pressure. You decide whether to proceed.
Repair & Calibrate
We complete the repair or installation, then perform altitude calibration — gas pressure verification, orifice check, and combustion analysis. We do not leave until your system is operating safely and efficiently at 6,035 feet. Then we follow up to make sure everything is holding.
Call Now — Same-Day Service Available
Which Service Do You Need?
Not sure which service fits your situation? Use this guide to find the right starting point.
| Your Situation | Recommended Service | Typical Timeline | Estimate Range |
|---|---|---|---|
| Furnace not producing heat | Furnace Repair | Same day | $150 – $600 |
| No heat — it's after hours / emergency | Emergency Repair | Under 90 min | $250 – $800 |
| Furnace is 15+ years old or repair costs exceed 50% | Installation & Replacement | 1 – 2 days | $3,500 – $8,000 |
| Seasonal checkup before winter | Maintenance Tune-Up | Same day | $89 – $179 |
| Ductwork, thermostat, or system-wide issue | Heating Repair | Same day | $150 – $900 |
| Heat pump not heating or cycling | Heat Pump Repair | Same day | $200 – $800 |
| Boiler pressure, leak, or no heat | Boiler Repair | Same day | $200 – $1,000 |
Frequently Asked Questions About Our Services
Direct Answer: Yes. We service all major HVAC brands including Lennox, Carrier, Trane, Goodman, Rheem, Bryant, York, Amana, Daikin, American Standard, Heil, Mitsubishi, and Bosch. Our service vehicles carry universal parts for same-day repair.
Direct Answer: Standard service calls receive same-day or next-day appointment scheduling. Emergency no-heat dispatch operates 24/7/365 with average arrival under 60 minutes in Colorado Springs.
Direct Answer: Yes. We provide free in-home consultations and written quotes for furnace, heat pump, and boiler replacements, including Manual J heat load calculations and rebate reviews.
Direct Answer: Our 25-point tune-up includes digital combustion analysis, heat exchanger borescope inspection, flame sensor cleaning, igniter testing, gas pressure adjustment, electrical checks, and filter replacement.
Direct Answer: Yes. We provide certified HVAC repair, maintenance, and installation for single-family homes, townhomes, commercial office buildings, retail centers, and multi-family units in El Paso County.
Direct Answer: Altitude reduces oxygen density by ~20%. Uncalibrated gas burners overfire, generating hazardous carbon monoxide and soot. We derate burner BTU input by ~24% using certified high-altitude orifices.
Direct Answer: All repairs include a 1-year parts and labor warranty. New equipment installations feature a 10-year parts warranty and up to 20-year to lifetime heat exchanger warranty protection.
Direct Answer: Yes. All technicians are NATE-certified, EPA 608 Universal certified, licensed with Pikes Peak Regional Building Department (PPRBD), background-checked, and drug-tested.
Direct Answer: We offer 0% APR promotional financing for 12 to 36 months, as well as low-interest installment terms up to 72 months starting as low as $75/month for qualified buyers.
Direct Answer: We complete and submit all Colorado Springs Utilities (CSU) and Xcel Energy rebate applications for you and provide full documentation for Federal IRA Section 25C tax credits (up to $2,000).
Colorado Springs Trusts Us With Their Heat — You Can Too
Every service includes altitude calibration, honest diagnostics, written estimates, and a follow-up call. Call any time — we are available 24/7 for emergencies.